Health & Household From Ambition on Amazon

🏆 Prime Male helps to replenish the vitality levels of mature men for a better look. Increase your mental and physical energy with its cutting-edge formula.

💪 ENERGY & STRENGTH - D-Aspartic Acid helps to increase your drive and performance

Material: Ambition rotary battery tattoo pen machine made of aluminium alloy frame and CNC carved. Length:148mm, Weight:210g. Detachable as a whole, easy to disassemble, maintain and replace spare parts.

About motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

Ambition Ninja rotary battery tattoo pen machine made of aluminium alloy frame and CNC carved. Detachable as a whole, easy to disassemble, Easy to maintain and replace parts. The diameter of the machine is 34mm. It is available in two versions, which differ in their length. The length of short version is 130mm, the long version is 140mm. And the weight of short version is 204g, the long version is 211g. You can freely choose two versions to buy.

The Ninja wireless machine built-in Japan Corless Motor, 10V - 9000RPM. 4.0MM stroke is good for demanding lining and color packing. It uses a direct drive system which makes the machine more powerful, low vibration, low skin loss, fast coloring, no hot for long time working.

MATERIAL: Ambition tattoo needles made of 316 medical stainless steel. The needle tip uses an A-stage needle. Each needle is selected three times, ensure the quality of each needle and the size of each needle is the same. Therefore there will be no inconsistency in the second time tattoo.

DESIGN: The shells of Ambition needle cartridges are made of translucent medical plastic, easy tattooing and better visibility. Low profile housing & better ink flow & shaped on the inside. Cartridges come with membrane to prevent ink leakage to the tube or machine.

Ambition rotary tattoo machine made of aluminum alloy frame and CNC carved. Detachable as a whole, easy to disassemble, Easy to maintain and replace parts. The 42mm tattoo battery pen single weight is 285g, length: 145mm/5.7inches, fine grip part diameter: 33mm/1.29inches, rough grip part diameter: 42mm/1.65inches. Takes about 2 hours to full charge, runs for 6-7 hours with one battery.

The tattoo pen built-in Japan Coreless Motor , 10V - 9000RPM. 4.0MM stroke is good for demanding lining and color packing. Cartridge battery pen uses a direct drive system which makes the machine more powerful, low vibration, low skin loss, fast coloring, no hot for long time working.

MATERIAL: Ambition #08 Bugpin Tattoo Needles Cartridges made of 316 medical stainless steel. The needle tip uses an A-stage needle. Each needle is selected three times, ensure the quality of each needle and the size of each needle is the same. Therefore there will be no inconsistency in the second time tattoo.

DESIGN: The shells of Ambition #08 Bugpin Tattoo Needles Cartridges are made of translucent medical plastic, easy tattooing and better visibility. Low profile housing & better ink flow & shaped on the inside. Cartridges come with membrane to prevent ink leakage to the tube or machine.

About Motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

About Battery: Battery Capacity is 1950mAh, built-in 3x 650mAh lithium battery. Can support long-term tattoo work, output stable. 8V output voltage can work for 5-6 hours, only need 1.5-2 hours to fully charge. More importantly, the battery can be replaced at any time.

Material: Ambition Ninja Pro tattoo machine made of aluminium alloy frame and CNC carved. Length:137mm, Width: 34mm,Weight:211g. Detachable as a whole, easy to disassemble, maintain and replace spare parts.

High Quality Motor: Ambition tattoo pen built-in custom corless motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

MATERIAL: Ambition cartridge tattoo grips tubes machined from a solid rod of Aircraft Aluminum. Each part of our grips is CNC carved. Easy to control and making tattoos easier, not easy to route. 3mm center bore is compatible with all build in drive-bar style machines.

DESIGN: Ambition cartridge tattoo grips tubes are detachable, easy to disassemble clean and autoclavable（plastic parts can not be autoclaved and easily deformed). The cartridge tattoo grips frame built-in gear, very easy to adjust, sound crisp and wear resistant. This adjustable tattoo cartridge grip special designed locking system brings easier interchanging of cartridges.

Material: Ambition rotary battery tattoo pen machine made of aluminium alloy frame and CNC carved. Length:151mm/5.9inch, Weight:205g/7.23oz. Detachable as a whole, easy to disassemble, Easy to maintain and replace parts.

About motor: Ambition rotary battery tattoo pen machine built-in custom corless motor, 10V - 9000RPM. More powerful, low vibration, low skin loss, fast coloring, no hot for long time working.

About Motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

About Battery: Battery Capacity is 1950mAh, built-in 3x 650mAh lithium battery. Can support long-term tattoo work, output stable. 8V output voltage can work for 5-6 hours, only need 1.5-2 hours to fully charge. More importantly, the battery can be replaced at any time.

About Motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

About Battery: Battery Capacity is 1950mAh, built-in 3x 650mAh lithium battery. Can support long-term tattoo work, output stable. 8V output voltage can work for 5-6 hours, only need 1.5-2 hours to fully charge. More importantly, the battery can be replaced at any time.

MATERIAL: Ambition tattoo needles made of 316 medical stainless steel. The needle tip uses an A-stage needle. Each needle is selected three times, ensure the quality of each needle and the size of each needle is the same. Therefore there will be no inconsistency in the second time tattoo.

DESIGN: The shells of Ambition needle cartridges are made of translucent medical plastic, easy tattooing and better visibility. Low profile housing & better ink flow & shaped on the inside. Cartridges come with membrane to prevent ink leakage to the tube or machine.

MATERIAL: Ambition tattoo needles made of 316 medical stainless steel. The needle tip uses an A-stage needle. Each needle is selected three times, ensure the quality of each needle and the size of each needle is the same. Therefore there will be no inconsistency in the second time tattoo.

DESIGN: The shells of Ambition needle cartridges are made of translucent medical plastic, easy tattooing and better visibility. Low profile housing & better ink flow & shaped on the inside. Cartridges come with membrane to prevent ink leakage to the tube or machine.

Material: Ambition rotary battery tattoo pen machine made of aluminium alloy frame and CNC carved. Length:145mm/5.71inch, Weight:220g/7.76oz. Detachable as a whole, easy to disassemble, Easy to maintain and replace parts.

About motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low vibration, low skin loss, fast coloring, no hot for long time working.

Ambition rotary tattoo machine made of aluminium alloy frame and CNC carved. Detachable as a whole, easy to disassemble, Easy to maintain and replace parts. The 33mm/1.29inches diameter tattoo battery pen single weight is 218g/0.48lb, length: 134mm/5.27inches.

The tattoo pen built-in Japan Corless Motor , 12V - 10500RPM. 4.0MM stroke is good for demanding lining and color packing. Cartridge battery pen uses a advanced gear system that make sure reliable, quiet operation and less vibration, wear resistance, long-term use without deformation, long life.

MATERIAL: Ambition #12 Standard Tattoo Needles Cartridges made of 316 medical stainless steel. The needle tip uses an A-stage needle. Each needle is selected three times, ensure the quality of each needle and the size of each needle is the same. Therefore there will be no inconsistency in the second time tattoo.

DESIGN: The shells of Ambition #12 Standard Tattoo Needles Cartridges are made of translucent medical plastic, easy tattooing and better visibility. Low profile housing & better ink flow & shaped on the inside. Cartridges come with membrane to prevent ink leakage to the tube or machine.

About Motor: Ambition rotary battery tattoo pen machine built-in Japan Corless Motor, 10V - 9000RPM. More powerful, low skin loss, fast coloring, no hot for long time working.

About Battery: Battery Capacity is 1950mAh, built-in 3x 650mAh lithium battery. Can support long-term tattoo work, output stable. 8V output voltage can work for 5-6 hours, only need 1.5-2 hours to fully charge. More importantly, the battery can be replaced at any time.