Industrial & Scientific From Aopin on Amazon

►Product Features: high quality aluminum alloy die casting integrated manufacturing, aerodynamic shape design, pressurization energy saving, strong jet force, superior air curtain or water curtain effect.

►Note: high pressure liquid or gas should be purified and filtered to avoid blockage;

►Package Content: 2 x Air Blow Off Flat Jet Nozzle.

❤Good Performance: Linear Bearing Adopts Interchangeability And Standardized Design. Compared With Other Products, There Is No Need To Worry About The Trouble Caused By Replacement And Wear. It Has Low Noise, Smooth Movement, Low Friction, High Rigidity And Long Service Life.

❤Bearing Material: The Aluminum Alloy On The Outside Is Durable, Pre-Lubricated And Easy To Maintain. Both Sides Are Equipped With Contact Seals To Prevent Contaminants From Entering. Provides Precise Low-Friction Linear Motion. The Steel Ball Inside Is Made Of Bearing Steel, And The Four Rows Of The Steel Ball Rotate To Form a Complete Closed Loop. Dynamic Load Rating (C): 882 N, Static Load Rating (Co): 1370 N.

❤What Will You Get?: 2 Pcs SCS20UU Linear Motion Ball Bearing. If You Have Any Questions About Your Purchase, Please Feel Free To Contact Us And We Will Do Our Best To Help You.

❤12mm to 12mm Universal Joint Shaft Coupling Material: High-Quality Nickel-plated 45# Steel Material, With Superior Corrosion Resistance And High Strength. Fixed By Screws; Main Color: Silver, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move.

❤Compensate For Axial And Radial Offset. Shock Mitigation, Vibration Absorption, High Transmission Efficiency, Noise Reduction, And Low Wear. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage. The Internal Rollers And Cross Bearings Are Of Fine Workmanship. So It Can Rotate 360°.

❤Package: 1 Pcs Universal Joint Coupling with Screw. Aopin Recommends Using M2 Hex Wrench!

★HIGH QUALITY MATERIALS★: The liquid level switch is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistance. Stainless steel even can work at temperatures up to 248˚F(120°C). The maximum pressure resistance of the stainless steel float can reach 30kg/cm2. Contacts are plated with rhodium, its life span can reach 2 million times. Switch liquid controller can be installed above or on side of the liquid level as required.

★HIGH SENSITIVITY★: Our ring magnet inside the float accurately controls the on and off of the reed switch. Sealing gasket can prevent water from leaking from the mounting hole. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation, greatly extending the service life. Connection part adopts waterproof solid glue, which has better waterproof performance and good sealing effectand to protect the safety of users!

★DIY CAN BE ADJUSTED★: Normally Closed (NC) and Normally Open (NO) can be adjusted manually, you need to use a vise to pull down the circlip under the float switch, Then adjust the direction of the float to realize the conversion between "NC" and "NO". The normal state is "NC". The liquid with high viscosity, generally should choose a larger outer diameter Float. If you want to control a large liquid range, you can use 2 different length combinations, or buy a double float level switch.

Machine taps material: The taps is made of high hardness high speed steel. It is suitable for tapping on the machine tool and can also be tapped by hand. Good red hardness and wear resistance. Cutter bit is not easy to break. The tapping speed is fast, the high precision and good chip removal. Taper Style: Starts the thread square with the workpiece.

Features: Three rows of straight grooves, good chip removal effect, sharp teeth without burrs and high strength, end is square handle style, convenient for firm clamping to tool, round drill bits design. Straight flute tools allow chips to collect in the flutes as they cut. Designed for hand cutting plastic, copper, brass, aluminum, sheet metal and other materials applications.

Easy to use: When tapping, every 1/2 or 1 turn of the twister should be turned, it should be reversed about 1/2 turn, so that the chips are easy to be discharged after breakingand. Thereby avoiding the stuck of taper taps due to the blockage of cutting edge. During this process, it is advisable to add coolant at the same time, and do not touch the cutting edge with your hands directly to avoid scratches.

* Easy to use - Push On, Pull Off Durable Protective Closure.

*Material: Made From Soft Pvc "Rubber Like" That Will Hold Up For Years Of Use. High-Quality Protective Rubber Cover Protects You From Damage Caused By Bad Weather Conditions. Mohs Hardness : 65-75

*Package Contents: 100 pcs Round End Cap. If You Have Any Questions Or Suggestions, Please Email Us.

❤Good Performance: Linear Bearing Adopts Interchangeability And Standardized Design. Compared With Other Products, There Is No Need To Worry About The Trouble Caused By Replacement And Wear. It Has Low Noise, Smooth Movement, Low Friction, High Rigidity And Long Service Life.

❤Bearing Material: Bearing Steel Is Durable, Pre-Lubricated And Easy To Maintain. Both Sides Are Equipped With Contact Seals To Prevent Contaminants From Entering. Provides Precise Low-Friction Linear Motion. 6 Rows Of Steel Balls Go Round And Round, Forming a Complete Closed Loop. Dynamic Load Rating (C): 980 N, Static Load Rating (Co): 1570 N.

❤What Will You Get?: 4 Pcs LM25UU Cylinder Linear Motion Ball Bearing. If You Have Any Questions About Your Purchase, Please Feel Free To Contact Us And We Will Do Our Best To Help You.

* Easy to use - Push On, Pull Off Durable Protective Closure.

*Material: Made From Soft Pvc "Rubber Like" That Will Hold Up For Years Of Use. High-Quality Protective Rubber Cover Protects You From Damage Caused By Bad Weather Conditions. Mohs Hardness : 65-75

*Package Contents: 10 pcs Round End Cap. If You Have Any Questions Or Suggestions, Please Email Us.

❤7mm to 8mm Rigid Couplings Set Screw Material: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Fixed By Screws; Main Color: Blue, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move.

❤Compensate For Axial And Radial Offset. Shock Mitigation, Vibration Absorption, High Transmission Efficiency, Noise Reduction, And Low Wear. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage.

❤Package: 4 Pcs Rigid Couplings Rigid with Screw. Aopin Recommends Using M2 Hex Wrench!

★Instructions: At the beginning of drilling and cutting, continuous water spray cooling is required to protect and prolong the tool life; With the bit mounted on the hand tool, start your hole diagonally, make a round trace and then hold drill straight.

★Product Features: Diamond coating, carbon steel material, nickel plated surface, durable, good quality, side hole design can quickly remove debris to keep the bit clean.

★Package Content: 2 x Diamond Hole Saw.