Tools & Home Improvement From Cortool on Amazon

🔥 Made of high strength 45# steel after heat treatment. It has a variety of properties such as durability, rust resistance, and new scientific spiral chip removal space design to speed up chip removal and improve work. Efficiency saves time and effort.

🔥 Use multifunctional carbide alloy cutter head，greatly improved hardness and toughness, and has longer service life, additional anti-skid triangle shank design, firm operation, no flashlight grip.

✅ Fully ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.

✅ Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use.

✅ This adapter is designed unique for 5/8-11 threaded core bits to regular 1/4 inch quick change hex shank.

✅ This CORTOOL adapter is for standard drill use in marble polishing kit, polishing wheel for drill, sanding drill bit , and sanding wheel for drill or polishing wheel for drill.

🔥 The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The cobalt coating makes the drill bit more durable so that it can last for years with uncompromised quality.

🔥 The spiral dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up.

✅12 Inch x 1 Inch Auger Drill Bit，Long Ship Auger

✅Creates deep, clean holes quickly and cleanly in hard or soft wood.

NO

✅ Specifications: 16PCS includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-1/8" (28.5mm), 1-1/4" (31.7mm), 1-3/8" (34.9mm) ，1-1/2（38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm) forstner bits

✅ Features: 3/8" Hex Shank is easy to install and tighten ,prevent the bit from slipping. Extra sharp cutting spurs is especially designed for cutting through hard and soft wood or other materials smoothly and efficiently.

✅ Two-fluted design provides faster,smoother cutting,provided with small pressure and the sets.

✅ The 3-flat shank titanium drill uses a doubleedged design to make cutting smoother and smoother;Increases cutting speed with self-centering and prevents walking.

✅ Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs.

✅ It is featured in a harder YG8C Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete.

✅ CORTOOL Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.

✅ High Speed Steel 4241 for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.

💿CORTOOL grinding wheels 4 1/2 inch is fully compatible with all angle grinders with 7/8 inch arbor with the rotating speed up to 13,300 RPM and 80M/S.

💿Due to the utilization of BASF resin and high-quality alumina, silicon carbide, they’re extremely durable and moisture-proof.

💿 Perfectly compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. Thickness: 3/64 inch (1.2mm). Operating up to 13,300 RPM.

💿 3/64 inch ultra thin design for fast burr free and precise cutting performance with minimal material loss.

✅ Universal Applicability: Diameter is 4 inch and arbor is 5/8 inch so this size can fit all the angle grinder in the market.

✅ High Premium Material: This cavring dics is made by premium titanium steel which has the higher hardness and longer life.

✅Countersink drill bit set for wood with tapered drill bit HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 5 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key) counter sinker drill bit for wood. Counter-bore, and wood plugs size 3/8" and 1/2". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills

✅Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking.

✅ Two-fluted design provides faster,smoother cutting,provided with small pressure and the sets.

✅ The 3-flat shank titanium drill uses a doubleedged design to make cutting smoother and smoother;Increases cutting speed with self-centering and prevents walking.

🔥 CORTOOL multifunctional 6pcs chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel so that you're ready to work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone & granite

🔥 These drill bits chuck perfectly into your SDS Plus hammer drill regardless of manufacturer.

✅ 7-in-ONE: This CORTOOL drill bit set provides three of 4.4" pilot drills and three diameters of hole saws (30 mm or 1.2 in., 50 mm or 2 in., 65 mm or 2.6 in.) to let you quickly punch clean holes.

✅ The custom shank on the connecting rod works with SDS Plus tools by all major manufacturers (Bosch, DeWalt, Hiltex, Makita, Milwaukee, and more) to make your hammer drill even more useful than it already was.

✅The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as substrate and organically combining resin elastomer and corundum with a special process.

✅Diameter 4.5", Thickness 3/5", Aperture 7/8", Maximum speed 13,300 (R.P.M), Maximum speed 80, Abrasive grain size - black silicon carbide 46#

🔥 Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments.

🔥 CORTOOL High-speed steel (HSS) material provides hardness for wear resistance.

10mm (approx. 3/8") wide wood chisel that is ideal for wood carvers and woodworkers of all levels.

HSS M2 blade is forged from hardened tempered steel designed to retain the sharp edge.