Arts, Crafts & Sewing From FoxAlien on Amazon

【Adjustable Air Volume】The air volume can be adjusted by the controller based on the engraving needs. This air pump remains low level of working noise; and there are 4 rubber feet to reduce the vibration. It is much quieter than those traditional pumps.

【Plug and Use, Easy Installation】No complicated installation. Connect the air pump to the engraving module, and then plug it into outlet. The air pump is ready to go!

【Durable and Long Service Life】It is made of high quality aluminum shell, which is easy for maintenance. It is fully compatible with all FoxAlien CNC machines.

The rotary module is fully assembled. No complicated assembly. Easy wiring. The package comes with a detailed and clear manual for using introduction and wiring.

The rotary module is adjustable according to different size of cylindrical objects. The rollers spacing can be adjusted by relocating the screws to fix different size of objects.

There is a bracket with wheels which is designed to provide support to goblets such as wine glass. The angle of the holder is adjustable according to different objects.

The size of the work bed is 20.47x18.11x0.87 inch (52x46x2.2 cm, L*W*H). Honeycomb diameter is 0.3 inch (7.5mm),

It perfectly fits FoxAlien Reizer, Reizer Mega, Masuter, LE-4040, LE-4040 PRO, and 4040-XE engraving machines. It’s also compatible with other engraving machines as long as the size is suitable.

The bed is made of high-quality metal, it’s strong, stable, rust-proof and durable.

It is made of high-quality aluminum which also functions as a large heatsink. With the aluminum body and cooling fan, heat dissipates faster. This ensures the module has a long service life.

It is compatible with all FoxAlien CNC machines, such as Masuter 4040, Masuter Pro, 4040-XE, WM-3020, and Vasto series.

This power module is ideal for engraving and cutting many different kinds of material such as plywood, bamboo, cardboard, acrylic, MDF etc.

It is a Grbl-based CNC cutting machine, which is more accurate and efficient than traditional hot wire cutters by hand. The HW40 can make more complicate patterns and cylindrical objects. It can make 2D cutting and 3D cutting.

It equips with a 32-bit control board. The cutting speed is 0-1000mm/min. Temperature changes by adjusting the output voltage. The highest temperature is 400 Celsius (752 Fahrenheit). The diameter of the resistance wire is 0.25mm. There is a red-light strip inserted in the base frame. It will light up when the machine starts to heat as a warning sign.

Home function and emergency stop are integrated in the controller box. The active working area is 400x400mm (15.75x15.75 inches). It is compatible with Grbl software such as UGS, Candle and Inkscape etc. It can be used in Windows, Linux and Mac OS

【Dual Y-motors; Stable, Fast & Smooth】Reizer engraving machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably and precisely than those with single Y-motor. The motors are driven by a 32-bit control board. It is more stable, faster and quieter. Engraving speed can reach 20000mm/min. It can greatly improve the carving efficiency.

【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality aluminum profiles make the cutter machine reliable and stable. Assembly can be completed within 10-20 mins. Protective shield on the module can filter 97% UV light and protect your eyes.

【Various Peripheral Products for Upgrade】15.75x15.75 inches (400x400mm) large engraving area meets daily DIY needs. Reizer is available for upgrade to fulfill more engraving needs such as cylindrical objects engraving. Various peripheral products are available for Reizer such as FoxAlien air assist pump, R42 rotary roller, offline controller, extension legs. (sold separately).

【Wide Software Compatibility & Applications】FoxAlien Reizer is compatible with GRBL software, and supports file format: SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. It supports Windows 7/8/10/11 and Mac OS. Great tool for wood, acrylic, leather, ceramic engraving.

【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality aluminum profiles make the laser cutter reliable and stable. Assembly can be completed within 10-20 mins. Protective shield on the laser module can filter 97% UV light and protect your eyes.

【Various Peripheral Products for Upgrade】31.5x15.75 inches (800x400mm) super large engraving area meets daily DIY needs. Reizer Mega is available for upgrade to fulfill more engraving needs such as cylindrical objects engraving. Various peripheral products are available for Reizer laser cutter, such as FoxAlien air assist pump, R42 rotary roller, offline controller, extension legs and 40W laser modules etc (sold seperately).

【Wide Software Compatibility & Applications】It is compatible with GRBL software, including Lightburn and Lasergrbl and supports file format: SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. It supports Windows 7/8/10/11 and Mac OS. Great tool for wood, acrylic, leather, ceramic engraving.

The size of the work bed is 22.05x21.26x0.87 inch (560x540x22mm, L*W*H). Honeycomb diameter is 0.3 inch (7.5mm). This size completely fits the Reizer (ASIN#B0967JSY2Y) engraving machine.

It perfectly fits FoxAlien Reizer engraving machine. It’s also compatible with other engraving machines as long as the size is suitable.

The bed is made of high-quality metal, it’s strong, stable, rust-proof and durable. Magnets can be applied to this worktable.

【Upgrade cover &Compressed light beam】It has a 20W fixed-lens laser module with a cover to filter the blue laser light. The light dot is only 0.2*0.15mm. This module has great performance in cutting and engraving.

This Y-axis Rotary roller engraving module is designed for FoxAlien Reizer, Reizer Mega, Masuter, LE-4040 and LE-4040 PRO engraver. (Not compatible with 4040-XE cnc router)

The rotary module is adjustable according to different size of cylindrical objects. The rollers spacing can be adjusted by relocating the screws to fix different size of objects.

The size of the work bed is 20.47x18.11x0.87 inch (52x46x2.2 cm, L*W*H). Honeycomb diameter is 0.3 inch (7.5mm),

Masuter 4040 is a cost-effective CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”). It uses a 60W spindle and NEMA17 stepper motors. Max moving speed is 2000mm/min and spindle speed range is 0~10000.

Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic, foam, resin, nylon, PCB, and aluminum etc.

It is made of high-quality aluminum which also functions as a large heatsink. With the aluminum body and cooling fan, heat dissipates faster. This ensures the module has a long service life.

It is compatible with all FoxAlien CNC machines, such as Reizer, Reizer Mega, Masuter, Masuter Pro, 4040-XE, WM3020 and Vasto.

This power module is ideal for engraving and cutting many different kinds of material such as plywood, bamboo, cardboard, acrylic, MDF etc.

This work table is designed in honeycomb shape which can exhaust smoke more effectively during engraving and help to make better engraving effect.

OD 6+ optical density. Visible light transmittance: 70%. These goggles is capable to filter blue/violet lazer light in wavelength of 405nm, 445nm, 450nm, 473nm, 515nm, 520nm, 532nm.

The glasses meets ANSI Z87+ and CSA Z94.3 safety standards.

The size of the work bed is 20.47x18.11x0.87 inch (52x46x2.2 cm, L*W*H). Honeycomb diameter is 0.3 inch (7.5mm).

4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000.

Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software.

The size of the work bed is 20.47x18.11x0.87 inch (52x46x2.2 cm, L*W*H). Honeycomb diameter is 0.3 inch (7.5mm).

It perfectly fits FoxAlien Reizer, Reizer Mega, Masuter, LE-4040, LE-4040 PRO, and 4040-XE engraving machines. It’s also compatible with other engraving machines as long as the size is suitable.

The goggles has OD 6+ optical density. Visible light transmittance: 70%. These goggles is capable to filter blue/violet lazer light in wavelength of 405nm, 445nm, 450nm, 473nm, 515nm, 520nm, 532nm.

Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast assembly. A detailed manual will guide you put the enclosure together.

3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic and carve on soft metals surface like aluminum. It’s great for home DIY and small business.

The control board is based on open-sourced grbl software. It supports Windows XP/7/8/10, Linux, Mac OS. It requires knowledge to make G-code. Pls contact us for tutorials if you are new to G-code.

It has a 20W fixed-lens laser module with a cover to filter the blue laser light. The light dot is only 0.2*0.15mm. This module has great performance in cutting and engraving.

This air pump is designed for engraver air assist system. The air pump is in portable size and light weight so that it can be taken to anywhere conveniently and will not take up much space.

The air volume is 8L-10L/min. The air volume is adjustable. There is a knob for adjustment so that you can control the air volume based on your engraving/cutting.

HOME function and Emergency-Stop button are integrated on the machine. The machine will go to home with simply press the button.

The FoxAlien 20W engraving module features a new technology "light beam compression", which have excellent performance in engraving delicate jobs and details.

The focus distance is fixed by 30mm. The package includes a positioning block for easy focusing. Electrical output: 20W; Optical output: 5W-5.5W.

300W spindle can handle hard material more easily such as aluminum and copper. It also improves working efficiency.

This CNC milling bits set is designed for aluminum cutting and milling. It includes 4pcs of 3-flute flat nose spiral end mill and 5pcs of 1-flute flat nose spiral end mills

Up-cutting spiral bit can clean chips faster during milling aluminum. This can prevent the chips damaging the bit and improve working efficiency.

The air pump is protected by a high quality and durable aluminum shell for safety and easy maintenance. There is an independent power switch. The working noise is lower than regular air pumps.

The air pump can be powered by power adapter or control board. For FoxAlien CNC machines, it can be connected to the control board directly (Reizer/Reizer Mega/Masuter 4040/Masuter Pro).

The air pump is in portable size and light weight so that it can be taken to anywhere conveniently and will not take up much space.

It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern.

The FoxAlien 20W engraving module features a new technology "light beam compression", which have excellent performance in engraving delicate jobs and details.

The focus distance is fixed by 30mm. The package includes a positioning block for easy focusing. Electrical output: 20W; Optical output: 5W-5.5W.