* CherryPicks.Reviews is reader-supported, Our editor review, and recommend the best products based on extensive data analysis, if you click on the product links, we may earn a commission through qualifying products purchased.
We last checked the prices on , and The listed prices are a reference for the past month based on our algorithms for our top listed products. Take note: A specific product price and availability may vary from time to time.
Price DisclaimerPrice Disclaimer
Top 15 Fulton Products On Amazon (Verified to buy)
When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
OFTEN USED IN THESE APPLICATIONS – These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
304 STAINLESS STEEL HOSE CLAMP- The 4” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
FLEXIBLE ADJUSTABLE SIZE RANGE- 4 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 4-7/16” (4.440” or 112.77mm) in full diameter down to appx. 3-7/16” (3.440” or 87.32mm) at its most compact diameter.
Show MoreShow Less
Top 3
Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2” in Diameter by 2-7/8” Wide For Veneers Laminate Wall Coverings and Edge Banding for Maximum Pressure Adhesion
Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.
When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won’t be even enough and can’t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion.
A full 12” long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods.
The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. The bottom of the handle forms the “J” to attach the heavy duty rubber roller without getting in the way of your rolling process.
Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. Perfect for working many of those project types around the house or in your woodworking shop. The roller measures approximately 2-7/8” wide.
Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.
The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.
12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits • Ideal for Wood • PVC • Resin • Composite • MDF and Drywall (Sheet Rock) Materials
Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them.
Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!
Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4’s, 6 x 6’s, PVC, Resin’s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects.
Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won’t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent for woodworkers, carpenters, DIYer’s and more!
Each high speed steel bit is made in the auger spiral style. The reason for this is to help clear build up and chips as you drill. When using any drill bit and especially longer bits like these, you must always clear the bit by pulling it back out of the hole to discharge the build up and chips. This helps reduce friction and the overall stress on the bit producing a much smoother hole and overall drilling experience.
Fulton 110V Single Phase On/Off Switch with Large Stop Sign Paddle for Easy Visibility and Contact for Quick Power Downs Ideal for Router Tables Table Saws and Other Small Machinery
We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don’t even have an external power switch separate from the router itself.
With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on.
Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18” long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to plug the switch unit into your standard wall outlet.
Please take note that the Paddle Button Stop Power Tool Switch is 15 amps and will not work with power tools drawing higher amperage. Keep this in mind when connecting to your machinery. This switch was designed to work with smaller machinery like routers and smaller table saws. Check your machinery before using this product.
The stop sign paddle measures approximately 5-3/8” tall by 3-7/16” wide to make it easy to see and even easier to contact when needed. Mounting hardware is included but some surfaces my require hardware that does not come with the switch for proper mounting.
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
10" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock
If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.
The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.
The black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1/2” increments. You can layout and draw circles from 1” to 10” in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many types of objects easy and truly simplified. Works on wood, poster board, plastic, metal, glass, composites and more!
It also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a “perfect circle”. The center finder/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10” in diameter.
Made from clear, fully transparent acrylic, the center finder/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder/compass is the tool to reach for.
11 Piece 21 Profile Contour and Angle Sanding Grip Pack for Sanding Inside and Outside Angles Beads Corners Flutes Sign Lettering Ceramics Molding Plastic Auto Body Marine Wood and Around The Home
Finally! A set of contours, angles and pads that work for inside, outside, flat, curved, small and tight areas all in one convenient package! The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house.
These 11 grips with 21 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9” x 11” sanding sheets or pre-cut sandpaper sheets (included). This set is a set of sanding pads that no one should be without.
The Contour Sanding Grip pads are double-ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one and a concave profile at the other along with a narrow flexible section in the middle that can be used for sanding
Our Angled Contour Grip sanding pads change the angle sanding game by providing you the ability to sand inside angles without flattening or smoothing the crispness of your original profile. Not only does this set contain inside angle profile pads, there are 1/8” and ¼” round overs, various non specific round over profile and of course the flat sanding grip to sand general shapes and objects.
This 11pc set comes with the following: 2.6mm thick flexible pad, 1/8” and ¼” radius round over grip, 90 degree grip, 60 and 75 degree grip, 30 and 45 degree grip and 1 each contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''.
If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
304 STAINLESS STEEL HOSE CLAMP- The 2 ½” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8” (2.877” or 73.08mm) in full diameter down to appx. 1-7/8” (1.874” or 47.61mm) at its most compact diameter.
FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8” (2.877” or 73.08mm) in full diameter down to appx. 1-7/8” (1.874” or 47.61mm) at its most compact diameter.
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)
Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
Scraper burnishers are a staple in most every woodworkers shop. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device.
This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The hardened, polished high carbon HRC 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give. The hardwood handle gives you a comfortable firm grip and helps provide leverage when placing pressure on the scraper.
The 6 included scrapers are made from a strong carbon steel and come in various shapes for a wide variety of applications. The three rectangle scrapers of various thicknesses in this pack will work for the vast majority of your projects. The curved (convex and concave curves), gooseneck and beveled scrapers are ideal for working oddly shaped pieces like chairs, spindles, boxes and more.
If you have never used a burnisher, it is relatively simple to use. The idea is to roll the edges of your scraper to create a burr so that it produces fine, light shavings and makes the wood surface very smooth. To do this, you simply tilt the burnisher slightly to one side of the scraper and run the burnisher along the edge repeatedly until you produce the burr you are looking for.
Once your scrapers have the desired burr on each edge, you’ll be able to produce wonderful looking results on your wooden surfaces. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process. We highly recommend burnishing each scraper out of the box for optimum performance. Also included is a handy booklet on “How to Sharpen a Card Scraper Using A Burnisher” to get you started right out of the box.
Show MoreShow Less
Our Fulton Review
Fulton products on Amazon (December 2024)
What to buy from Fulton?
Fulton sell products mainly in the Automotive category.
The brand has over 204 products listed on Amazon with a price range of $7.50 to $699.00 form our picks.
Currently, the average price of their product is $71.14 which is considered affordable. You can make your choice from the list of products offered by the Fulton.
Is Fulton a good brand?
A brand is an essential factor when making a purchase. What do we think about the Fulton? Well, according to the information available on Amazon, Fulton products are sold by Spreetail.
The seller has received about 20,224 feedbacks from buyers with an average start rating of 4.7. With a rating as this from the number of feedbacks, we can conclude that Fulton is the brand can be categorized as average as its products receive an average rating which is still good and quite acceptable.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
We are crawling & scraping a large amount of data from 204 Fulton products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to Fulton, and you can use those data to help you make informed buying Boat Trailer Parts & Accessories,Wall-Mount Mailboxes And Spring Clamps decisions. Those recommend the 15 best products from Fulton based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about Fulton products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Top 10 Fulton Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.