Industrial & Scientific From GLTL on Amazon

The Bostwick Consistometer is made in strict accordance with the standard. ASTM F1080-1993(2013) /Mill Spec R-81294D. Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer.

Summary of Test Method. A sample of the material to be tested is poured into a reservoir and the distance of flow in a horizontal direction is read from a ruled track after a fixed time following the materials release from the reservoir.

Significance and Use.This measurement of flow gives results that cannot be predicted with viscosity measurements, due to surface tension and density effects.

★4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time.

❸【Simple to use and cost saving】: The workpiece does not need to be coated with traditional rust-proof oil. It does not require painting and degreasing procedures, which can also save labor costs and operating time, so it is very economical and practical. Compared with rust-proof oil, it does not stain objects and hands. After disassembling the workpiece, it can be assembled on line or processed again without cleaning again. Therefore, using it can greatly provide efficiency.

❹【Wide application】: Instruments and tools: precision instruments, measuring tools, power tools, hand tools, drills, bearings, etc. In the automotive field: engines, flywheels, car bodies, brake discs and various steel parts. Electronic appliances: control boards, communication equipment, computers, motors, electronic parts, etc. In the field of ships and aviation: engines, engines, motors, turbine parts, etc. Precision machinery: precision molds.

❺【Customized Service】: We can provide customized size service. Please contact us. At the same time, there is a discount if the purchase volume is large.

Ambient temperature: 5℃~40℃ Relative Humidity: 20%~80% (non-condensing)

Package Included: 1 x WT103 Gaussmeter Tesla meter; 1 x User Manual; 1 x Metal Probe;1 x DC Adapter ( includes AAA*3 Batteries )

3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes

4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect.

Read the output current and process variables of the meter. The HOM communicator uses the HART communication protocol, and the HART communicator can be used with most instruments that use the HART communication protocol.

Understand the working status and fault information of the HART .HART intelligent equipment can be produced for testing, diagnosis and inspection meter.

★. The display screen is larger and can be seen more clearly;

★. With USB data transmission interface.

★. With different unit conversion function, it can be reset at any position, which is a good choice for measuring the depth of small holes.

★ [READING UNIT: μm]--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um

★ [HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.

★ [NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.

<b>Unit conversion:</b> mm/inch can be interchanged only by pressing the key once, easy to convert relative measurement and absolute measurement.

<b>Precise measurement:</b> It adopts carbon steel for mechanical structure and chrome plating on the surface, which can ensure the accuracy and stability for long-term use.Made of stainless steel, it has long-lasting dimensional stability.

★ Speed range: 0-4000r / min

★ Timing range: 0-60min

★ Maximum power: 145W