Electronics From Misaso on Amazon

This controller corresponding required to be double freedom , motor of is DC brush motor, the motor is 12V or 24V, current of single motor must be less than 15A (default each one shaft configure 10A fuse). Four direction of all should have limit switch.

Maximum RAM Capacity: 16GB

Graphic: 1x PCI-E 1X 1x PCI-E 16X; Storage: 4x SATA2.0

USB Ports:6x USB2.0 (rear panel, -board USB Header)

Connector No cutting or splicing.

New high quality .

Give a and more sophisiticated look for your car

Front camera: 1080P

Display: 2.0 inches

Battery: polymer lithium battery 3.7V180MAH

EER -E SSB transmit-

All- support: USB, LSB, , AM, FM

DSP : 3000, 2500, 1700, 500, 200, 100, 50 Hz passband

make you are buying the right LCD.

Features

THE ULTIMATE PARTY BOX SPEAKER ENCLOSURE: Say hello to the greatest 8 inch speaker box you'll ever use. Say goodbye to unwelcome rattling disrupting your music's sound quality and the - thanks to the air-, resonant free recessed side panels sealed with aliphatic resin wood glue, car audio speakers enclosure vastly improves the overall sound quality and bass of your system.

NOT JUST FOR VEHICLES: Use speaker terminal enclosure in your home, place of business, or anywhere!

Front end power: 100W

Output : supply 18V

Dual NVMe to PCIe Adapter Adopts ASMedia ASMedia ASM2812 Chipset, It does NOT on PCIe bifurcation supported by . Each SSD costs PCI-e 3.1 x4 Channel individually, non-interfering. (The final speed depends on the SSD and the 's PCI-e bandwidth)

Compatible with M.2 SSDs (PCI-e NVMe ): All Size 110x 22mm, 80x22mm, 60x22mm and 42x22mm. Hardware Requirement: Available PCI-e 8x/16x Slot on Mainboard, Compatible with PCI-e 3.0/2.0/1.0 standards

M.2 NVMe Adpater lets you to use SSDs individually, to or in a storage pool for OS or 3rd party software RAID configuration. Does NOT support Hardware RAID

Qualcomm 6125 8-core processor, low power consumption, high performance.

Android 10.0 system, wireless CarPlay ,Wireless Android into one module.

Dual Bluetooth built-in for hand free calling, Music and all kinds of Bluetooth TPMS, etc.

Support hands-free calls

9.5 inch Touchscreen

Play high-definition

PCI-E Slot :2xPCI-E X16 ,PCI-E Slot :2xPCI-E X1

Memory type: DDR4 3000/2666/2400/2133MHz ,Memory slot: 8xDDR4 DIMM

2x USB3.0 header(1group) 2x USB2.0 header(1group) 6xSATA3.0 interface

Seven function buttons, including two USB-A (support larger current), two USB-C, PD Trigger, communication port and a dial button to . It can support and automatically detect PD3.0/2.0, PPS, QC4+, QC3.0/2.0, , SCP, SSCP, , VOOC, SuperVOOC, DASH, Warp, 2.4A, DCP.

Support , which can upgrade the device . And can export data for further .

This model can support English, and Japanese, hold the dial button, then the Language you'd like.

Material: ABS+metal

Model: GA800

Control Box: 107 x 65 x 26mm/4.2 x 2.6 x 1 inch

Brand new.New high .

Connector No cutting or splicing.

Memory type: support 2*DDR3; Maximum memory capacity: support a of 16G, a single maximum of 8G; Memory description: support 1333/1600MHz frequency

The B75 USB-BTC motherboard uses all-solid capacitors to make the motherboard more stable; it supports LGA1155 CPU and uses the B75 chipset to give full play to the CPU performance; the motherboard is suitable for the mining industry due to low and expansion interfaces.

The appearance and color of different batches of may be different, which will not affect the use

If there is no sound after installing the fiber optic box,Pls check it as following steps:

3. In the optical fiber communication of the vehicle, all the optical fiber signals must be ableto communicate normally. Due to the damage of certain electrical equipment of the vehicle, the optical fiber communication is abnormal. At this time, it is necessary to short-circuit theoptical fiber signal of the damaged device, (common For example: 6-disc CD, telephonecommunication module, or directly install the optical fiber audio box to the caramplifier).

the audio input from devices.Connect the tester and device with the audio cable.By UTP CABLE port on the meter,you can the connection of network cable.Support VGA/ 1.0 video input, connect VGA/ video, switch selector to select or VGA mode.The maximum resolution is 1920 x 1440(IV8W ) / 1920X1080 (IV8S)

The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera,having TVI,AHD,CVI.It also provides many useful functions,such as video display,PTZ control,DC12V output power,audio , generator,VGA video signal input,HDMI1.0 signal input,RS485 data searching,cable testing,LED lamp etc.

It is useful for the to install and maintain security system at night.LED On/Off pressing button,easy to operate.The tester has advanced power control and protection circuit,low--saving,4 to 5 hours on a single charge,can be used normally for 12 hours.