Electronics From MokerLink on Amazon

26 Gigabit Ports: Includes 24 Gigabit POE+ ports and 2 Gigabit SFP UpLink. switching capacity is 52Gbps, each port can reach 1G rate at the same time, with high speed transmission; 2 SFP UpLink, can be more flexible and long distance to connect to different network devices, such as routers, switches, servers, etc.

High POE Power: Maximum support 300W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: it will not supply power to passive 24V PoE and NON-PoE devices.*

This network switch include 4 gigabit PoE ethernet ports and 1 gigabit uplink, all ports support 10/100/1000Mbps rate, switching capacity up to 14Gbps, has higher data transmission performance

The poe port 1-4 support IEEE802.3af/at standard protocal, can connect multiple poe devices, such as POE camera, poe ap, etc. Please note that passive 24v poe is not supported

8 Gigabit PoE Ports: Includes 8 POE ports, all ports support gigabit rate(1000Mbps), can provide more bandwidth and connect 8 poe devices.

High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.* Please confirm the input voltage range: 100-240V

10 Ports: Includes 8 POE ports(10/100Mbps) and 2 Gigabit UpLink ports(10/100/1000Mbps). The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc.

High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*

This label maker B21 use heat to print, no ink or toner is required. supports 20-50 mm width labels, supports larger label printing than D11 and D110. Use rechargeable batteries, equipped with a USB cable for charging, no longer need to replace the battery, automatic standby when not working, more energy-saving, and can be used for a longer time on one charge(**Please note: fully charge the battery before using it for the first time)

Easy to setup and use, just need to download the app(the same as D11 & D110) and connect to the label maker via bluetooth(no wired connection required), comes with a free roll of white paper. After opening the lid and installing it, the app will automatically recognize the template, enter the content and print, then tear it off and paste it on the item, aslo can save the template content for direct print next time

This Wifi Outdoor Bridge works at 5.8Ghz band, built-in 12dbi antenna, Max 900Mbps between the bridge, support 2-3KM long-distance wireless transmission, automatically adjust the transmission power and channel, reduce signal interference, make wireless transmission more stable

The installation is very simple. It is powered by a 24V poe adapter(included) and supports dial pairing. Set one of the CPE DIP switches to H, set it host and transmit the signal; and set the other CPE switch to C, set it slave client and receive the signal; then reset, will automatically complete pairing, no other configuration required. There are two 100Mpbs Ethernet ports, the WAN port connect to the POE Adapter POE Port, the LAN port connect to the LAN device.

What’s Included: 2pcs gigabit media converter; 2pcs Single-Mode SFP transceiver; 2pcs AC/DC Power Supply; 1 x User’s Manual. The transceiver has been installed in the converter, making it easier to use.

Gigabit date: 10/100/1000Mbps Ethernet port, support auto-negotiation, MDI/MDIX auto-crossover, full/half Duplex, Cat5/5e,Cat6 for 100 meters; 1.25Gbps Single-Mode SFP Module, support LC interface 1310nm single mode fiber, support 20KM distance transmission.

Including 2 mounting ears, 8 switch screws, 4 sets of cabinet kits (screws + snaps).***Please confirm the matching size of the kit and switch, Ensure correct size holes***

Please pay special attention to the distance between the screw holes of the switch. The distance between the mounting ears and the holes is 14mm. If it is other distances, it will not be compatible,

This label tape is specially suitable for NIIMBOT D11/D110 label Maker. Using thermal technology, no toner and ink, very clean and not dirty, the content will not fade and will last for a long time

The surface of the label is covered with a special material film, which makes the printing content is more durable, and has better performance than ordinary label paper or A4 paper, such as waterproof, oil-proof, tear-resistant, non-toxic, harmless, and degradable.

This label tape is specially suitable for NIIMBOT B21 label Maker. Using thermal technology, no toner and ink, very clean and not dirty, the content will not fade and will last for a long time, 1.18 * 2 inch can print more content, can print 5-6 lines with about 30 characters per line, support address info printing

The surface of the label is covered with a special material film, which makes the printing content is more durable, and has better performance than ordinary label paper or A4 paper, such as waterproof, oil-proof, tear-resistant, non-toxic, harmless, and degradable.