Musical Instruments From Mugteeve on Amazon

【Balanced 1/4" TRS to XLR Male Cable】This xlr to 1/4 quarter inch cable is used to output balanced/unbalanced audio signal from 1/4" port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc. These devices usually has 1/4" bal/unbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc.

【TS replacement & active speaker】This stereo balanced trs cable can be used on unbalanced 1/4" mono TS port, please don't worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.

【3.5mm to dual xlr male cable】This cable is designed to carry audio signal from 1/8 jack device like mobilephone, computer, tablet and MP3, to XLR input device include mixer, DJ console, studio monitor, speaker, etc. Due to this cable can separate left and right channel signal, it is often used in audio recording and editing. The 1/8 mini TRS connector can work in both 3.5mm TRS or 3.5mm TRRS jack, please don't worry.

【Specification】This 1/8 to dual XLR splitter cable is 10FT/3meters long. It's nylon braided, strong and heavy duty. 3.5mm connector is gold plated, gold plated design can reduce signal distortion. 2 XLR end has blue and red ring, they will help you to distinguish left and right channel signal. The cable will give a soft feeling.

【2RCA to 2XLR】This rca to xlr cable is designed to output left and right two channel signal from RCA port to XLR input device. Devices like mixer, CD player, DJ controller, keyboard and so on usually have L/R RCA output ports. These RCA ports are usually marked with tape out, phono, unbalanced RCA, etc. People mostly use this xlr to rca cable to ouput RCA signal to subwoofer, studio monitor, mixer, equalizer and many other devices with 3pin xlr input port.

【Professional Structure】This dual xlr to dual rca cord plug is build with high performance OFC professional audio cable. This cable has a very flexible pvc coating, it will give you a soft and quality feeling. Under the PVC coating, there is 100% covered aluminum foil which is also shielded by 90%OFC(Oxygen Free Copper). This structure can minimize the noise interference, no hum and buzz will produce. Thus you can enjoy a clear and nice sound.

【Appliactions】This dual xlr female to 3.5mm cable is designed to combine two separated signal into one stereo output. Like you can connect two microphones to a video camera, a portable recorder, a FM transmitter, a computer or other devices with 1/8" mini jack input. It is mainly used for recording or livestream broadcast. You can also output stereo signal from mixer to these devices with mini stereo phone input. What about combine guitar and mic input through mixer?

【Specification】This dual XLR female to 1/8 Stereo mic cable is 10FT/3meters long. It's nylon braided, strong and heavy duty. 3.5mm connector is gold plated, gold plated design can reduce signal distortion. 2 XLR end has blue and red ring, they will help you to distinguish left and right channel signal. The cable will give a soft feeling.

【TRS to XLR female Cable】This 1/4" trs male to xlr female cable is designed to output balanced audio signal from xlr port to quarter inch balanced/unbalanced input device. People mostly use it to connect mic to karaoke machine. Other suitable devices include mixer, keyboard, interface, effects, equalizer, etc. This trs stereo to xlr cable is almost suitable for all balanced xlr output to bal/unbal 1/4" input applications.

【Heavy duty design】This trs to xlr balanced cable is nylon braided design with PVC coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90% OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily.

【Applications】If you want to play a mono xlr signal in two left and right speaker, if you want to record one microphone by stereo type, and if you want to send one signal to two separated and different devices, this cable would help you. This XLR splitter Y cable is designed to split one balanced audio signal into two balanced signal. Some customers would also use it for DMX connection.

【Specification】This 1 female to 2 male XLR break out cable is 2 feet (0.6meters) long. It is nylong braided, strong and heavy duty. The internal connection between single male XLR and double female XLR is balanced type. So the signal won't get EMI and distortion.

【2RCA to 2XLR Female】This female XLR to RCA cable is designed to output audio signal from left and right channel XLR port, to a device with two RCA input port. People most likely use it to connect a mixer to a powered speaker, connect a preamp to a sound card, connect DJ controller to a studio monitor, etc. This cable is almost suitable for all applications where need to link 2 XLR output port to 2 RCA input port.

【Professional Structure】This phono RCA to 3pin XLR male cable is build with high performance professional audio cable. The PVC wire is soft and flexible, while it will give you a quality feeling. Under the PVC coating, there is 100% covered aluminum foil which is also shielded by 90%OFC(Oxygen Free Copper). This structure can minimize the noise interference, no hum and buzz will produce. Thus you can enjoy a clear and nice sound.

▶【Applications】This dual quarter inch to xlr cable is mainly used for a device which has left and right 1/4" output jack and need to combine two channel signal into one. These devices mainly include electronic drums, keyboard, mixer, amp, DJ controller, amp attenuator, podcast mixer, etc. Customers are most likely to use this 2 quarter inch to xlr cord to send L/R signal to a speaker, a recorder, a mixer, a camcorder, or an amp from those devices for audio recording or editing.

▶【Specification】This dual 1/4 mono to xlr cable is 10feet/3meter in length. It is cotton braided, flexible and heavy duty. The two TS ends are gold plated, it can reduce signal distortion. The shield material is 90% OFC, it can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the xlrm connector, so the internal wire won't break out easily, the cable can work for a very long time. This is a heavy duty dual 1/4 ts to xlr stereo cable.

【Not compatible with Rocksmith】This 1/4" to USB guitar cable is designed to connect guitar and other line-level instruments to pc computers for recording. Suitable OS include Windows and IOS system. Kindly note that this cable is NOT compatible with any PC games, including PS2/PS3/PS4/Guitar Hero/Xbox/RockSmith, etc. It is ONLY suitable for instrument audio recording.

【Plug-and-Play connection】Simply plug the 1/4" TS plug into your guitar and the USB connector into your computer. Your computer will recognise it as an audio input and will install all the necessary drivers automatically. No special drivers are required, just "plug and play" with your windows PC or mac.

▶ This piano key sticker is suitable for almost all kinds of piano keyboards, inlcuding 37/49/54/61/76/88 keys piano/organ. Just please note that for different brands keyboards, the key dimension may be a bit different. For this piano keyboard sticker, the white key sticker dimension is 0.61"*1.57"(15.5mm*40.0mm), black key sticker dimension is 0.33"*1.54"(8.5mm*39.0mm). Please carefully check if the sticker dimension is just right.

▶ This multi-color keyboard key stickers include two sheets, one for white keys and the other for black keys. Each piano note sticker has a serial number at the left bottom corner, the user guid at the corner of the sheet will tell you how to paste the sticker according to this serial number. If you still can't find the way, please contact us for more details or ask a teacher for help.