* CherryPicks.Reviews is reader-supported, Our editor review, and recommend the best products based on extensive data analysis, if you click on the product links, we may earn a commission through qualifying products purchased.
We last checked the prices on , and The listed prices are a reference for the past month based on our algorithms for our top listed products. Take note: A specific product price and availability may vary from time to time.
Price DisclaimerPrice Disclaimer
Top 15 West System Products On Amazon (Verified to buy)
G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties. This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges.
G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when applied with specific techniques.
Country of origin: United States
Show MoreShow Less
Top 2
WEST SYSTEM 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-A Resin (32 fl oz), WEST SYSTEM 205-A Fast Hardener (7 fl oz), and one set of calibrated 300 Mini Pumps. 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)
POT LIFE AT 72°F (22°C) is 9 to 12 minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40°F (4°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 205 Fast Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
Show MoreShow Less
Top 3
West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz., White
EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.
IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours.
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass.
BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics.
MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for repairs to plastic boats, canoes or kayaks made of polyethylene or ABS.
THESE CALIBRATED PUMPS deliver the proper working ratio with one full pump stroke of resin for each one full pump stroke of hardener. They mount directly on resin and hardener cans.
CONVENIENTLY & ACCURATELY meter Group A, B, and C WEST SYSTEM 105 Resin-based epoxy. These pumps eliminate the mess and waste associated with pouring epoxy components and measuring by weight or volume.
SET CONTAINS 3 PUMPS: One for the resin and two for the hardeners. One hardener pump delivers the correct ratio for 5:1 resin/hardener (105/205 & 105/206). The other hardener pump delivers the correct ratio for 3:1 resin/hardener (105/207 & 105/209). These pumps have you covered regardless of which of the four WEST SYSTEM 105 Resin-based epoxies you're using.
ONE FULL PUMP STROKE of each pump delivers 0.8 fl oz of 5:1 resin/hardener, or 0.9 fl oz of 3:1 resin/hardener.
DURABLE POLYPROPYLENE Mini Pumps give years of dependable service. Priming, ratio verification and operating instructions are included with each pump set. As packaged, the pumps are ready to install on the Group Size B containers. Extension tubes for Group Size A containers are included with the set. Group Size C extension tubes are included with 105-C Resin and in the 207-SC or 209-SC resin and hardener.
Show MoreShow Less
Top 5
West System 105-B Epoxy Resin Bundle with 206-B Slow Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set, Pale Yellow
The product type name is "West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)"
This product is manufactured by West System
This product is manufactured in United States
Package Dimensions: 36.83 H x 15.24 L x 29.21 W (centimeters)
Show MoreShow Less
Top 6
WEST SYSTEM 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
105 EPOXY RESIN is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended at the correct ratio with one of 4 WEST SYSTEM hardeners, it cures to a high-strength solid that is functionally waterproof, highly resistant to moisture vapor. Based on which hardener you choose, it cures at a wide range of temperatures.
THIS EPOXY IS EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to create the necessary handling characteristics to suit the job at hand. Whether you need to create a pigmented coating, high-strength epoxy joints, a fairing compound, or low-friction surface, WEST SYSTEM 105 Resin is modifiable to meet your project's requirements.
COMBINED WITH WEST SYSTEM 205 Fast Hardener or 206 Slow Hardener at a 5-parts resin to 1-part hardener ratio, 105 Resin cures, developing superior physical properties at room temperature. It has excellent structural bonding properties, can be modified with fillers and additives, and will easily coat fiberglass other porous substrates.
COMBINED WITH BLUSH-FREE 207 Extra Clear Hardener at a 3-parts resin to 1-part hardener ratio, 105 Resin is excellent for coating and fiberglass cloth applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. It will not blush or turn cloudy, even in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
COMBINED WITH 209 Extra Slow Hardener at a 3-parts resin to 1-part hardener ratio, 105 Resin is especially well suited for general coating and structural bonding applications in extremely warm and/or humid conditions or when working time is needed at room temperature. Forms a clear, amber-colored solid with excellent physical properties and moisture-vapor resistance.
105 EPOXY RESIN is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended at the correct ratio with one of 4 WEST SYSTEM hardeners, it cures to a high-strength solid that is functionally waterproof, highly resistant to moisture vapor. Based on which hardener you choose, it cures at a wide range of temperatures.
THIS EPOXY IS EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to create the necessary handling characteristics to suit the job at hand. Whether you need to create a pigmented coating, high-strength epoxy joints, a fairing compound, or low-friction surface, WEST SYSTEM 105 Resin is modifiable to meet your project's requirements.
COMBINED WITH WEST SYSTEM 205 Fast Hardener or 206 Slow Hardener at a 5-parts resin to 1-part hardener ratio, 105 Resin cures, developing superior physical properties at room temperature. It has excellent structural bonding properties, can be modified with fillers and additives, and will easily coat fiberglass other porous substrates.
COMBINED WITH BLUSH-FREE 207 Extra Clear Hardener at a 3-parts resin to 1-part hardener ratio, 105 Resin is excellent for coating and fiberglass cloth applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. It will not blush or turn cloudy, even in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
COMBINED WITH 209 Extra Slow Hardener at a 3-parts resin to 1-part hardener ratio, 105 Resin is especially well suited for general coating and structural bonding applications in extremely warm and/or humid conditions or when working time is needed at room temperature. Forms a clear, amber-colored solid with excellent physical properties and moisture-vapor resistance.
Show MoreShow Less
Top 9
WEST SYSTEM 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
206 SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and when extended working time and cure time are needed. 206 Slow Hardener produces a slow epoxy cure that develops its full physical properties at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid.
MIX WITH WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/206 Slow Hardener has excellent bonding, coating and barrier coating properties.
CURES AT TEMPERATURES as low as 60°F (16°C). Will cure faster at warmer temperatures. Pot life at 72°F is 20 to 25 Minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 60°F (16°C).
PAIR WITH 105-B WEST SYSTEM 105 Epoxy Resin at a 5-parts resin to 1-part hardener ratio.
EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating.
205 FAST HARDENER is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
MIX WITH WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties.
CURES AT TEMPERATURES as low as 40°F (4°C). Will cure faster at warmer temperatures. Pot life is 9 to 12 Minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40°F (4°C).
PAIR WITH WEST SYSTEM 105-A Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 5-parts resin to 1-part hardener ratio.
EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating.
EASY TO USE, epoxy resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. One-to-one mix, no pumps required.
FAST CURING 2-PART EPOXY allows 3-5 minutes of working time. It adheres to a number of surfaces including wood, ceramic, metal, leather, plaster, stone, fiberglass, glass, cork, some plastics, and paper. G/5 is an excellent choice for quick repairs around the house, high-end crafts and much more.
IDEAL VISCOSITY allows it to penetrate porous surfaces yet it's viscous enough to bridge gaps when gluing broken objects.
EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand. Adding G/5 to other WEST SYSTEM epoxies can speed their cure time. Since this very quick-cure epoxy is not as strong or waterproof as our 105 Resin-based epoxies or G/flex epoxies, G/5 will reduce the cured physical properties of other epoxies when blended with them.
BEST FOR PROJECTS that will remain dry and are not subject to high loads. Not recommended for long-term bonds subject to high loads or moisture. Comes with one 4 fl oz of Resin, and one 4 fl oz of Hardener.
EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.
IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours.
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics.
MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for repairs to aluminum and boats and canoes or kayaks made of polyethylene or ABS.
EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand. Adding G/flex to other WEST SYSTEM epoxies can improve their toughness and flexibility. Not intended for clear coating.
Show MoreShow Less
Top 15
WEST SYSTEM 404-15 High-Density Filler 15.2oz, Off-White
The brand has over 129 products listed on Amazon with a price range of $8.60 to $193.58 form our picks.
Currently, the average price of their product is $63.80 which is considered affordable. You can make your choice from the list of products offered by the West System.
Is West System a good brand?
A brand is an essential factor when making a purchase. What do we think about the West System? Well, according to the information available on Amazon, West System products are sold by Aserson.
The seller has received about 8,985 feedbacks from buyers with an average start rating of 4.9. With a rating as this from the number of feedbacks, we can conclude that West System is the brand is exceptional good, and their products are highly recommended as most consumers were delighted making use of the products from West System.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
We are crawling & scraping a large amount of data from 129 West System products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to West System, and you can use those data to help you make informed buying Epoxy Adhesives,Urea Resin Adhesives And Solvent-Based Adhesives decisions. Those recommend the 15 best products from West System based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about West System products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Top 10 West System Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.